A vulnerability scanner can tell you that a system has a weakness.
It cannot, by itself, tell you what that weakness means to a ship.
A vulnerability affecting an isolated office workstation is not automatically equivalent to a vulnerability affecting an engineering workstation connected to propulsion, power or navigation systems.
This is why ship OT vulnerability assessment requires a different mindset from ordinary corporate IT scanning.
The assessment must consider the technology, network architecture, operational function, connectivity, existing controls and potential consequences of compromise.
IMO defines maritime cyber risk in terms of the possibility that compromised, corrupted or lost technology assets could contribute to operational, safety or security failures. Its current cyber risk management guidance emphasizes identifying, analysing, assessing and treating cyber risk rather than relying on a single technical test. [oai_citation:0‡International Maritime Organization](https://www.imo.org/en/ourwork/security/pages/cyber-security.aspx?utm_source=chatgpt.com)
For shipboard OT, the objective is therefore not simply to find as many vulnerabilities as possible.
The objective is to identify meaningful weaknesses without creating unnecessary operational risk.
What Is a Ship OT Vulnerability Assessment?
A ship OT vulnerability assessment is a structured examination of operational technology assets, configurations, software, communication paths and security controls to identify weaknesses that could affect vessel operations.
Depending on scope, it can examine:
- OT assets
- Engineering workstations
- HMIs
- PLCs and controllers
- Navigation systems
- Power management systems
- Propulsion control systems
- Cargo systems
- Network infrastructure
- Firewalls
- Remote access systems
- Vendor connections
- Software and firmware versions
- Security configurations
- Network traffic
The exact scope should always be defined before testing begins.
Why Ship OT Vulnerability Assessment Is Different
Traditional IT security often focuses heavily on confidentiality, integrity and availability of information systems.
OT introduces another dimension: the physical process.
IT System
|
v
Data / Application
|
v
Business Impact
OT System
|
v
Control / Monitoring
|
v
Physical Process
|
v
Operational Impact
A cyber incident involving ship OT can therefore affect more than data.
Depending on the system, consequences may involve operational disruption, loss of monitoring, loss of control, safety concerns or recovery challenges.
IMO’s onboard cybersecurity guidance specifically addresses OT systems as systems that monitor or control physical devices, processes and events and notes that increasing connectivity between IT and OT increases potential cyber vulnerabilities and risks. [oai_citation:1‡International Maritime Organization](https://wwwcdn.imo.org/localresources/en/OurWork/Security/Documents/ANNEX%20Guidelines%20on%20Cyber%20Security%20Onboard%20Ships%20v.4.pdf?utm_source=chatgpt.com)
The Wrong Way to Assess Ship OT
A simplistic methodology might look like this:
Find IP Range
↓
Run Scanner
↓
Find CVEs
↓
Export PDF
↓
Call It a Security Assessment
This can produce a long report without providing meaningful understanding of the vessel’s actual cyber risk.
It may also create unnecessary risk if intrusive scanning is performed against sensitive operational equipment without appropriate authorization and technical validation.
A Better Ship OT Assessment Model
Define Scope
↓
Understand Operations
↓
Build Asset Inventory
↓
Map Architecture
↓
Identify Exposure
↓
Review Configuration
↓
Analyse Traffic
↓
Correlate Vulnerabilities
↓
Controlled Validation
↓
Assess Operational Impact
↓
Prioritize Risk
↓
Remediation Plan
↓
Final Report
This approach places technical findings inside their operational context.
Start With the Asset Inventory
The first question should not be “Which scanner should I use?”
It should be:
“What systems are actually onboard?”
An asset inventory should identify the systems, their purpose, network location and operational importance.
| Asset | Function | Network | Potential Importance |
|---|---|---|---|
| Engineering workstation | Maintenance and configuration | OT | High |
| HMI | Operator interface | OT | High |
| PLC | Process control | OT | High |
| Navigation workstation | Navigation support | Bridge | High |
| Server | Application or data service | IT/OT | Medium/High |
| Network switch | Network connectivity | OT | High |
These classifications are illustrative. Actual criticality must be determined from the vessel’s architecture and operational requirements.
Understand What Each Asset Does
A hostname and IP address are not enough.
An assessment should establish why the asset exists and what depends on it.
- What function does it perform?
- Which systems depend on it?
- Which systems can communicate with it?
- Can it influence a physical process?
- Can it be accessed remotely?
- What happens if it becomes unavailable?
- What happens if its data is manipulated?
- How would an incident be detected?
- How would the system be recovered?
Map the Attack Surface
A ship’s attack surface includes more than internet-facing services.
SHIP
|
+-------------+-------------+
| | |
v v v
Shore Vendor Physical
Access Access Access
| | |
+------+------+-------------+
|
v
Ship Network
|
+--------+--------+
| | |
v v v
IT OT Bridge
| | |
| +--------+
| |
v v
Office Critical
Systems Systems
Potential attack paths can include:
- Internet connectivity
- Satellite communication
- Remote maintenance
- Vendor connections
- Engineering laptops
- USB devices
- Wireless networks
- Shipboard IT systems
- Remote access gateways
- Unnecessary network services
External Exposure Assessment
External attack surface research can be a useful first layer of a maritime cybersecurity assessment.
Authorized external intelligence can help identify publicly visible infrastructure, services, certificates, domains and other technical indicators.
Tools such as Shodan can support this work.
But external visibility must be interpreted carefully.
A public-facing asset does not automatically prove that an internal OT system is vulnerable.
Likewise, an exposed service does not automatically demonstrate that the service belongs to a particular vessel or operational system without appropriate validation.
Using Shodan in Maritime Cybersecurity
Shodan can support authorized external attack surface assessment by providing information about internet-visible services and infrastructure.
- Open ports
- Service banners
- Internet-visible devices
- Certificates
- Protocol information
- Potentially exposed services
The correct workflow is:
External Intelligence
↓
Potential Exposure
↓
Asset Attribution
↓
Technical Validation
↓
Architecture Context
↓
Risk Assessment
Shodan should therefore be treated as an intelligence source rather than a complete vulnerability assessment.
Using Nmap in Ship OT Assessments
Nmap can support network discovery and service identification when its use is authorized and technically appropriate for the environment.
However, active network scanning should be approached carefully in live OT environments.
Some operational devices may be sensitive to unexpected traffic, unusual requests or intensive probing.
| Environment | Preferred Assessment Approach |
|---|---|
| Public infrastructure | Authorized external intelligence and exposure assessment. |
| Corporate IT | Controlled active scanning where authorized. |
| OT laboratory | Controlled technical validation. |
| Live safety-critical OT | Passive or specifically authorized testing based on risk. |
The appropriate testing method should be decided before scanning begins.
Passive Network Analysis
Passive analysis can provide valuable information without actively probing operational equipment.
Where authorized network captures are available, tools such as Wireshark can help identify communication patterns and network relationships.
- Communicating hosts
- Protocols
- Unexpected connections
- Traffic patterns
- Network boundaries
- Potentially unusual activity
Passive analysis is particularly useful when the objective is to understand the network before deciding whether active testing is justified.
Software and Firmware Vulnerability Review
Once assets have been identified, the next step is to understand their software and firmware.
- Operating system
- Software version
- Firmware version
- Vendor
- Product family
- Installed services
- Security configuration
- Support status
This information can then be compared with authoritative vulnerability intelligence.
Do Not Treat Every CVE as an Immediate Ship Risk
A common vulnerability assessment mistake is to treat every vulnerability identifier as equally important.
Consider two findings.
| Finding | Technical Context | Potential Priority |
|---|---|---|
| Vulnerable office application | Isolated from OT | Medium |
| Vulnerable engineering workstation | Connected to critical OT | High |
The same software vulnerability can have very different consequences depending on network position and operational role.
This is why ship OT vulnerability assessment needs context.
Use Vulnerability Intelligence Carefully
A professional review should correlate vulnerabilities with the actual asset.
- Correct vendor
- Correct product
- Correct version
- Correct configuration
- Correct deployment
- Relevant attack path
- Relevant operational function
- Existing compensating controls
Sources such as the National Vulnerability Database, CISA Known Exploited Vulnerabilities catalog and vendor security advisories can provide useful vulnerability intelligence, but each finding should still be validated against the vessel’s actual environment.
Configuration Review Can Be More Valuable Than Scanning
A vulnerability scanner may identify a software weakness.
A configuration review can reveal how the system is actually exposed.
- Unused services
- Weak authentication
- Excessive privileges
- Unnecessary network access
- Remote administration
- Firewall rules
- Default configuration
- Legacy protocols
- Insecure management interfaces
- Insufficient logging
For OT environments, configuration context can be essential to understanding actual risk.
Remote Access Vulnerability Assessment
Remote access deserves its own assessment because it can connect external users to onboard systems.
External User
|
v
Authentication
|
v
Remote Access Gateway
|
v
Firewall
|
v
DMZ
|
v
OT Boundary
|
v
Engineering System
|
v
Operational Equipment
Each step should be evaluated.
Authentication
- Are individual accounts used?
- Is strong authentication implemented?
- Are inactive accounts removed?
- Are privileged accounts controlled?
Authorization
- Which systems can the user reach?
- Are permissions limited?
- Can the user reach critical OT directly?
Monitoring
- Are sessions logged?
- Are failed attempts recorded?
- Can remote activity be investigated?
Availability
- Can remote access be disabled?
- Is emergency access controlled?
- What happens if the remote access infrastructure is compromised?
Engineering Workstations Are Important Attack Paths
Engineering workstations can be particularly important because they may have legitimate access to operational equipment for configuration, diagnostics or maintenance.
A compromise may therefore provide an attacker with more capability than compromising an ordinary office workstation.
An assessment should consider:
- Operating system status
- Installed engineering software
- Remote administration
- USB usage
- Local privileges
- Network connectivity
- Authentication
- Application control
- Backup
- Vendor support mechanisms
Legacy Systems Are a Special Challenge
Ships can have long operational lifecycles.
Some onboard systems may therefore use software or hardware that is difficult to patch, replace or modernize without significant operational work.
A vulnerability assessment should not simply conclude:
“Patch immediately.”
The practical question is:
“If this system cannot be patched immediately, what compensating controls can reduce the risk?”
Compensating Controls for Marine OT
- Network segmentation
- Firewall restrictions
- Application allowlisting
- Restricted remote access
- Network monitoring
- Access control
- Physical security
- Backup and recovery
- Vendor access controls
- Additional monitoring
The appropriate control depends on the vulnerability, system architecture and operational constraints.
Risk Is More Than a CVSS Score
CVSS can help describe technical severity, but a maritime OT assessment should also consider operational context.
Technical Severity
+
Exploitability
+
Network Exposure
+
Asset Criticality
+
Operational Impact
+
Safety Impact
+
Existing Controls
|
v
Risk Priority
This produces a more useful engineering decision than ranking findings solely by numerical vulnerability score.
A Practical Ship OT Risk Matrix
| Exposure | Asset Criticality | Potential Priority |
|---|---|---|
| Low | Low | Low |
| High | Low | Medium |
| Low | High | High |
| High | High | Critical |
This is a simplified model. A real assessment should incorporate the vessel’s threat model, operational requirements and existing controls.
Do Not Ignore Network Position
Two devices with the same vulnerability can have completely different risk profiles.
Device A
Vulnerability
|
v
Isolated Network
|
v
Limited Impact
Device B
Vulnerability
|
v
Engineering Network
|
v
Critical OT
|
v
Potential Operational Impact
This is why asset inventory and network mapping should come before serious vulnerability prioritization.
Active Testing Requires Authorization
Penetration testing can be valuable in maritime cybersecurity, but it should not automatically be performed against live operational systems.
The testing environment should be classified before technical interaction begins.
| Environment | Typical Assessment Position |
|---|---|
| Documentation | Low risk |
| External attack surface | Controlled and authorized |
| Network captures | Passive |
| Configuration data | Non-intrusive |
| Laboratory OT | Controlled active testing |
| Live vessel OT | Strictly scoped and authorized |
The goal is to demonstrate security weaknesses without introducing unnecessary operational risk.
When a Vulnerability Scanner Should Not Be the First Tool
There are situations where documentation, configuration review or passive analysis can provide more useful information than immediate scanning.
- Unknown OT architecture
- Unknown device sensitivity
- Legacy equipment
- Safety-critical systems
- Unclear authorization
- Production vessel operations
- Unknown maintenance state
In these situations, understanding the environment should come first.
Ship OT Vulnerability Assessment Workflow
1. Define Scope
↓
2. Identify Critical Functions
↓
3. Build Asset Inventory
↓
4. Map Network Architecture
↓
5. Identify External Exposure
↓
6. Review Remote Access
↓
7. Review Configurations
↓
8. Analyse Passive Traffic
↓
9. Correlate Vulnerabilities
↓
10. Validate Selected Findings
↓
11. Assess Operational Impact
↓
12. Prioritize Risks
↓
13. Recommend Controls
↓
14. Produce Evidence-Based Report
What Evidence Should Be Collected?
A strong assessment should be supported by evidence.
- Asset inventories
- Network diagrams
- Firewall configurations
- Remote access configurations
- Software versions
- Firmware versions
- Network captures
- Service information
- Vulnerability records
- Security logs
- Vendor documentation
- Existing risk assessments
Evidence allows findings to be reproduced, reviewed and defended.
What Should a Ship OT Vulnerability Report Contain?
| Section | Purpose |
|---|---|
| Executive summary | Explain the overall security posture. |
| Scope | Define systems and activities reviewed. |
| Methodology | Explain how evidence was collected. |
| Asset inventory | Document relevant assets. |
| Architecture | Show network and trust relationships. |
| Vulnerability findings | Document technical weaknesses. |
| Evidence | Support each finding. |
| Operational impact | Explain why the finding matters. |
| Risk rating | Prioritize remediation. |
| Recommendations | Provide practical corrective actions. |
| Limitations | Clearly document what was not tested. |
Example Finding Structure
Finding
↓
Affected Asset
↓
Technical Evidence
↓
Attack Path
↓
Operational Context
↓
Potential Impact
↓
Risk Rating
↓
Recommended Control
↓
Verification Method
This structure turns a vulnerability record into an engineering decision.
Example: Weak Remote Access Control
Consider a hypothetical engineering workstation that is reachable through a remote maintenance gateway.
The technical finding might be:
Remote access remains available outside the documented maintenance window.
The risk analysis should then ask:
- Who can use the connection?
- What systems can they reach?
- Is authentication individual?
- Is the activity logged?
- Can the connection reach critical OT?
- What controls restrict the path?
The remediation might involve restricting access windows, improving authentication, limiting reachable systems, strengthening monitoring or redesigning the remote access architecture.
Example: Unsupported Operating System
An unsupported operating system on an engineering workstation is a security concern.
But “unsupported” does not automatically mean “critical.”
The assessment should examine:
- Network exposure
- Application requirements
- Remote access
- Segmentation
- Available security controls
- Operational importance
- Replacement feasibility
If replacement is not immediately possible, compensating controls may reduce the practical risk.
Ship OT Vulnerability Assessment and IACS
IACS UR E26 addresses cyber resilience at ship level, including the secure integration of IT and OT throughout the ship’s lifecycle. IACS identifies equipment identification, protection, attack detection, response and recovery as core elements. [oai_citation:2‡IACS](https://iacs.org.uk/news/iacs-adopts-new-requirements-on-cyber-safety/?utm_source=chatgpt.com)
IACS UR E27 addresses cyber resilience of onboard systems and equipment, including requirements relevant to system integrity and equipment security. The current IACS publication identifies UR E27 Rev.1 as the current version. [oai_citation:3‡IACS](https://iacs.org.uk/resolutions/unified-requirements/ur-e/ur-e27-rev1?utm_source=chatgpt.com)
These requirements reinforce an important principle: vulnerability management should be connected to the broader cyber resilience architecture rather than treated as an isolated scan.
IMO Cyber Risk Management
IMO’s maritime cyber risk framework describes cyber risk management as identifying, analysing, assessing and communicating cyber-related risk and deciding how the risk should be treated. The stated objective is safe and secure shipping that remains operationally resilient to cyber risks. [oai_citation:4‡International Maritime Organization](https://www.imo.org/en/ourwork/security/pages/cyber-security.aspx?utm_source=chatgpt.com)
This creates a useful structure for vulnerability assessment:
Identify
↓
Analyse
↓
Assess
↓
Communicate
↓
Treat
↓
Review
A vulnerability finding becomes valuable when it supports one of these decisions.
Vulnerability Assessment Should Support Recovery
Finding a vulnerability is only half of the problem.
A ship operator should also know how the affected system can be restored if the weakness is exploited.
- Are configuration backups available?
- Are critical software images preserved?
- Are recovery procedures documented?
- Can compromised credentials be replaced?
- Can affected systems be isolated?
- Can critical operations continue safely?
- Has recovery been tested?
Cyber resilience includes the ability to respond and recover, not only the ability to prevent compromise.
Remote Ship OT Vulnerability Assessment
A significant part of a vulnerability assessment can be performed remotely when the vessel operator can provide suitable evidence and documentation.
- Asset inventory review
- Network architecture review
- External attack surface assessment
- Firewall configuration review
- Remote access review
- Software and firmware review
- Vulnerability intelligence correlation
- Network capture analysis
- Security control review
- Risk prioritization
- Remediation planning
This approach can provide useful independent security analysis without automatically performing intrusive testing against live operational equipment.
When Onboard Testing Is Necessary
Remote analysis has limitations.
Some findings require physical validation, controlled testing or access to equipment that cannot be evaluated accurately from documentation alone.
In those situations, testing should be planned with the vessel operator, relevant engineering personnel and appropriate safety controls.
For safety-critical OT, the assessment itself should never become an uncontrolled operational experiment.
Common Ship OT Vulnerability Assessment Mistakes
- Scanning before understanding the network.
- Running aggressive scans against live OT without appropriate authorization.
- Treating every CVE as equally important.
- Ignoring network segmentation.
- Ignoring remote access.
- Ignoring vendor connectivity.
- Relying only on automated scanners.
- Using external exposure data as proof of internal vulnerability.
- Ignoring legacy systems.
- Failing to assess operational impact.
- Providing remediation advice without considering operational constraints.
- Reporting vulnerabilities without evidence.
A Better Vulnerability Assessment Philosophy
Do Not Ask Only:
“What vulnerabilities exist?”
Ask:
“What assets exist?”
↓
“How are they connected?”
↓
“What is exposed?”
↓
“What can actually be exploited?”
↓
“What could the compromise affect?”
↓
“What controls already exist?”
↓
“What should be fixed first?”
This produces a risk-focused assessment instead of a vulnerability list.
Final Perspective
A ship OT vulnerability assessment should never be judged by the number of vulnerabilities discovered.
It should be judged by how accurately it explains the vessel’s real exposure and how effectively it helps the operator reduce meaningful risk.
Identify the assets.
Understand the operational function.
Map the network.
Review external and remote access.
Correlate vulnerabilities with actual systems.
Validate important findings carefully.
Then prioritize the weaknesses that could genuinely affect operations, safety, security or recovery.
The best maritime vulnerability assessment is not the most aggressive one. It is the one that produces the clearest evidence and the safest path to risk reduction.
Need a Ship OT Vulnerability Assessment?
Cautivra provides remote, evidence-based vulnerability assessment for shipboard OT and connected maritime systems.
Depending on project scope, the assessment can review OT assets, network architecture, external exposure, remote access, firewall configurations, software and firmware versions, vulnerability intelligence, network captures and existing security controls.
The objective is to identify meaningful weaknesses, explain their operational relevance and provide prioritized remediation recommendations.
Request a Ship OT Vulnerability Assessment
Frequently Asked Questions
What is a ship OT vulnerability assessment?
It is a structured review of shipboard operational technology assets, configurations, communication paths and security controls to identify weaknesses and assess their potential operational impact.
Is a ship OT vulnerability assessment the same as penetration testing?
No. A vulnerability assessment identifies and evaluates weaknesses, while penetration testing attempts to validate exploitability through controlled testing. In live ship OT environments, the appropriate level of testing should be determined by scope, authorization and operational risk.
Can Nmap be used for ship OT vulnerability assessment?
Nmap can support authorized network discovery and service identification, but active scanning of live operational systems requires careful assessment of potential impact. Passive analysis and configuration review may be more appropriate as an initial step.
Can Shodan find vulnerable ship systems?
Shodan can help identify publicly visible services and infrastructure, but it does not establish that an internal ship OT system is vulnerable. External findings require attribution and validation against the actual architecture.
Can Wireshark be used for ship OT security?
Yes. When authorized network captures are available, Wireshark can help analyze protocols, communicating systems, traffic patterns and unexpected communication.
Should every ship OT vulnerability be patched immediately?
No. Patch decisions should consider the vulnerability, affected asset, operational function, exposure, available compensating controls and the practical consequences of making the change.
Why is asset inventory important for vulnerability assessment?
Without an accurate asset inventory, it is difficult to understand which systems are vulnerable, how they are connected and which findings have operational significance.
Can ship OT vulnerability assessment be performed remotely?
Yes. A remote assessment can review asset inventories, architecture diagrams, configurations, external exposure, remote access, software versions, vulnerability information, network captures and other evidence supplied by the operator.
What is IACS UR E26?
IACS UR E26 addresses cyber resilience of ships and focuses on secure integration of IT and OT across the vessel lifecycle, including equipment identification, protection, detection, response and recovery. IACS has revised the requirement since its original publication, so the applicable current version and scope should be checked for the specific vessel.
What is IACS UR E27?
IACS UR E27 addresses cyber resilience of onboard systems and equipment. The current IACS publication identifies Rev.1 as the current version.